Jbl SG2020 User Manual download pdf (Page 16)

15

ENJOYING JBL SOUNDGEAR

Using External

(Auxiliary) Sources

1. Switch on the auxiliary device (TV, VCR or

MP3 player) connected to the front or rear

AUX 1 or AUX 2 jacks.

2. Select the desired auxiliary device by repeat-

edly pressing the Aux 1/2 button ‹5.

3. See the Recording section on page 16 for

information on tape recording from an auxiliary

source.

Playing Tapes

Playback

JBL Soundgear can only use normal bias tapes.

It is equipped with two cassette decks, “A”

and “B”. Deck A is used only for playback, and

will stop at the end of each side of the tape.

Deck B may be used for either playback or

recording, and includes an auto reverse capability

which can be controlled with the Play Mode

button h.

1. Switch the unit on ¡1.

2. Open either cassette deck A or B by pressing

gently on the door at the Eject position · .

Insert the cassette with the tape side to the bot-

tom and the side that you wish to hear facing

the front. Gently push the door to close it.

3. Press the Tape A/B button ¤)!. If

necessary, press the button again to select the

other deck. JBL Soundgear will display which

deck has been selected cn. The unit will

not select a deck that does not have a tape

loaded.

4. Auto reverse (for Deck B only):

Press the Play Mode button h repeatedly to

select:

• One side : Unit plays the side that is fac-

ing the listener and stops automatically at the

end of that side.

• All sides : Unit plays the front and

reverse sides and stops automatically at the

end of the tape.

• Endless loop : Unit plays both sides of

tape six times in succession.

JBL Soundgear will display the current Play

mode k.

5. Press the Play button c7 to begin play-

back. Press the Reverse Play button g@ to

play the reverse side of the tape. The direction

of the tape will be indicated in the display h.

6. In either the Stop or Play mode, press the

Fast Forward

›› ››

■

§

››

9 button to

fast forward to the desired point, or to the end

of the side. The Fast Forward indicator m

will light in the display.

To rewind, in either the Stop or Play mode, press

the Rewind

■

‹‹ ‹‹

§

‹‹

# button. The

Rewind indicator j will light in the display.

7. To end playback, press the Stop/Reset

button 6.

Alternatively, the unit will stop automatically at

the end of the tape.

Tape Counter

The Tape Counter c will apppear in the

Information Display when in Tape mode.

During Play or Fast Forward, the Tape Counter

c increases and, during rewind, the tape

counter decreases.

While in Stop mode or while playing, press the

Counter Reset button ‡ to reset the counter

to zero. This can be convenient for locating the

point at which you wish to begin a recording

session. Note, however, that JBL Soundgear

will automatically rewind the tape to its

beginning and it will not stop when the

counter reaches zero.

43

31

1 2 ... 11 12 13 14 15 16 17 18 19 20

Comments to this Manuals

No comments