Jbl SG2020 User Manual download pdf (Page 17)

Recording From a CD, Radio

or Externally Connected

Equipment

Recordings can only be made using Deck B. Only

normal bias tapes should be used.

1. Power the unit on ¡1, and insert a blank

tape into Deck B. Use the Fast Forward §9

or Rewind §# buttons to proceed to the

point where you wish the recording to start.

Make sure to proceed past the tape leader to

avoid missing the beginning of the source

signal.

2. Press the Play Mode h button repeatedly

to select recording on one side only or to

record on both sides in auto reverse mode .

We do not recommend that you use the endless

loop mode , as it may result in rerecording

over desired material that was recorded earlier

in the session.

3. Select the source input: Tuner, CD,

Aux 1/MP3, Aux 2 ‹^35.

4. Press the Rec/Pause button d8 to place

JBL Soundgear in the Recording Ready mode.

The Record indicator i will flash.

5. Press the Play button c7 to begin record-

ing onto the front side of the tape, or the

Reverse button g@ to begin recording onto

the reverse side of the tape. The direction of

the tape will be indicated in the display h.

JBL Soundgear will automatically start the

input source and the recording session

simultaneously.

6. The recording may be interrupted to skip over

undesired material by pressing the Rec/Pause

button d8. To resume recording, press either

the Rec/Pause button d8, or the Play but-

ton c7.

7. To end the recording session (but not the

input), press the Stop/Reset button 6.

Alternatively, JBL Soundgear will stop recording

automatically when it reaches the end of

the tape.

CD Sync Recording

The CD Sync recording function dubs a complete

CD or programmed tracks automatically onto a

cassette.

1. Select the CD Function .

2. Open the CD compartment with the CD

Open/Close button ‚, insert discs and close

the CD compartment again.

3. If desired, program a play list of selected

tracks (see Programmed Play section on p. 14).

If you wish to record only one track, use the

Forward or Reverse Search buttons

§&( to select that track.

4. Insert a blank tape into Deck B. Use the Fast

Forward §9 or Rewind §# buttons to

proceed to the point where you wish the record-

ing to start. Make sure you have enough blank

tape available to fully record the CD or pro-

grammed play list.

5. Press the Play Mode h button repeatedly

to select recording on one side only or to

record on both sides in auto reverse mode .

We do not recommend that you use the endless

loop mode , as it may result in rerecording

over desired material that was recorded earlier

in the session.

If JBL Soundgear is unable to finish recording a

track on the first side of the tape, it will record

that track completely on the reverse side.

6. Press the CD Sync button to begin

recording. JBL Soundgear will play the tape in

Mute mode for 7 seconds in order to skip the

tape leader; then the CD player will begin play-

ing and JBL Soundgear will begin recording.

JBL Soundgear will not allow you to select a

different input without stopping the recording

session.

Recording From Tape

to Tape (Dubbing)

JBL Soundgear will only dub recorded materials

from Deck A to Deck B, since only Deck B is

capable of recording. Use only normal bias tape

in JBL Soundgear.

Insert a previously recorded cassette in Deck A

with the side you wish to copy facing toward

you. Insert a blank cassette in Deck B with the

side you wish to record on facing toward you.

2. Press the Tape A/B button ¤)! to

select the tape function, and press it repeatedly

to select each deck so that you can rewind each

tape to the beginning using the Rewind button

§#.

3. Press the Normal Dub button k to automat-

ically start dubbing at normal (regular playback)

speed. Alternatively, press the High Dub i

button to automatically start dubbing at twice

normal playback speed. The quality of the

recording may be better if Normal Speed dub-

bing is used rather than High Speed Dubbing.

When dubbing at high speed, turn down the

Volume ⁄Ù to prevent possible damage to

the loudspeakers by the high-pitched playback

of the source tape.

4. During dubbing, the Pause button d8 will

have no effect. You cannot change the speed of

the dub during a dub. Although the Volume

control ⁄Ù will affect the level of playback,

it will have no effect on the recording level,

which is not adjustable.

5. Press the Stop/Reset button 6 to end

the dubbing session. Alternatively, the unit will

stop automatically at the end of the tape.

ENJOYING JBL SOUNDGEAR

Recording Tapes

1 2 ... 12 13 14 15 16 17 18 19 20

Comments to this Manuals

No comments

Jbl SG2020 User Manual Page 17

Comments to this Manuals

Related products and manuals for Acoustics Jbl SG2020