Jbl SG2020 User Manual download pdf (Page 15)

Basic Operation (cont.)

Repeating Tracks

The Repeat function is only available using the

remote control, and cannot be accessed from

the front panel buttons.

Once Repeat play has been selected, JBL

Soundgear will continue to repeat the selection

until you cancel it by pressing the Repeat but-

ton % once, so that the Repeat indicator p

in the display goes out.

Repeat play may be selected either during play

or in the Stop mode. If a programmed play list is

playing, you may select either one track to

repeat, or all discs to repeat the entire play list.

Repeat One Track

Press the Repeat button % ONCE to display

Repeat One p, and press the Play (or

›

■■

on remote control) button c ^ to start play.

Repeat One Disc

Press the Repeat button % TWICE to display

Repeat One Disc p, and press the Play

(or

›

■■

on remote control) button c ^ to

start play.

Repeat All Tracks on All Discs

Press the Repeat button % THREE times to

display Repeat All Disc p, and press the

Play (or

›

■■

on remote control) button c ^

to start play.

Repeat Only Selected Tracks

Program the desired tracks as described in the

next section, and press the Repeat button %

while in Programming mode to display

Repeat One or Repeat All Disc p.

If you program a play list during Repeat Play of

an entire disc, the display will change to

Repeat All Disc p.

Random Play

Press the Random button before or during

play, and JBL Soundgear will play the tracks on

the selected disc in random order. The Random

indicator y will light in the display. To return

to normal play, press the Random button

again.

If you tap the Forward Search button §(,

JBL Soundgear will randomly select a new

track. If you tap the Reverse Search button

§& once, it will go to the beginning of the

current track. Tap the Reverse Search button

§& again, and JBL Soundgear will randomly

select a new track.

Programmed Play

You may program a play list of up to 20 tracks

anywhere on up to 3 discs.

1. While in Stop mode, press the CD/Tuner

Program button bÓ.

2. Press one of the Disc Selector buttons

or the Disc Skip button Ô to

select a disc. If the correct disc is already in

position, then press the CD Skip/Search

■

‹‹ ‹‹

§& or

›› ››

■

§( buttons once

to select the disc so that it appears in the

display c.

3. Use the CD Skip/Search

■

‹‹ ‹‹

§& or

›› ››

■

§( buttons to select the desired

track. For example, to select Track 6, press the

CD Skip/Search

■

‹‹ ‹‹

§& or

›› ››

■

§( buttons repeatedly until track number

“06” is displayed c.

4. Press the CD/Tuner Program button bÓ

to store the track in the play list.

5. Repeat Steps 2 through 4 to program up to

20 tracks into your play list. If you previously

selected the correct disc, you do not need to

repeat Step 2 in order to program additional

tracks into your play list.

6. Press the Play c^ button (or

›

■■

remote control) to start play.

7. If you stop play in the middle of the play list

so that the program does not appear in the dis-

play, the play list will remain stored in memory,

but the next press of the Play button c 7

will cause the entire current disc to play. To

resume playing the programmed play list, press

the CD/Tuner Program button bÓ, which

will bring the program back to the display

co.

8. If you program several tracks on the same

disc out of order, e.g., Track 8 before Track 7,

JBL Soundgear will play the tracks back in the

programmed order, even though the Track

Number Display d lists the programmed

tracks in numbered order.

9. The Disc Skip Ô button does not oper-

ate during programmed play.

10. Random play cannot be selected while a

programmed play list is playing.

Reviewing the Contents

of the Play List

While in Stop mode, press the CD/Tuner

Program button bÓ to display the disc num-

ber, track number, and program number.

Continue to press the CD/Tuner Program but-

ton bÓ to step through the entire play list.

Clearing the Programmed

Play List

There are three different ways to clear a previ-

ously programmed play list:

• While in Stop mode, press the CD/Tuner

Program button bÓ, and then press the

Stop/Reset button *.

• Turn off the Power ¡1.

• Press the CD Open/Close button ‚.

Adding Tracks to a Previously

Programmed Play List

1. Press the CD/Tuner Program button bÓ

repeatedly to step through the play list until

“00” is displayed as the track number c.

2. Select the desired track on the desired disc

by pressing the Disc Direct buttons

or Disc Skip button Ô as necessary, and

then by pressing the CD Skip/Search

■

‹‹ ‹‹

§& or

›› ››

■

§( buttons to proceed to

the correct track.

3. Press the CD/Tuner Program buttons bÓ.

Making Changes

to the Play List

1. Press the CD/Tuner Program button bÓ

repeatedly until the disc and track number of

the selected step is displayed c. This track

will be replaced in the play list by the new track

you are about to program.

2. Select the desired track on the desired disc

by pressing the Disc Direct buttons

or Disc Skip button Ô as necessary, and

then by pressing the CD Skip/Search

■

‹‹ ‹‹

§& or

›› ››

■

§( buttons to proceed to

the correct track.

3. Press the CD/Tuner Program button bÓ.

It is not possible to delete a single step from

the programmed play list.

ENJOYING JBL SOUNDGEAR

Playing CDs

1 2 ... 10 11 12 13 14 15 16 17 18 19 20

Comments to this Manuals

No comments

Jbl SG2020 User Manual Page 15

Comments to this Manuals

Related products and manuals for Acoustics Jbl SG2020