Jbl 660GTI User Manual Page 11

  • Download
  • Add to my manuals
  • Print
  • Page
    / 20
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 10
11
Figure 20.
Figure 19.
W
OOFER MOUNTING CONSIDERATIONS
All woofers require a rigid baffle and isolation between the front and back of the
speaker for best low-frequency extension.
The 660GTi woofer may be used in an infinite baffle or in a small sealed enclosure
with a volume equal to or larger than 1/8 ft
3
. The 560GTi woofer may be used in
an infinite baffle or in a small sealed enclosure with a volume equal to or larger
t
han 1/12 ft
3
.
The GTi competition speaker systems include a choice of grille trim. See Figure 19 to
change to the carbon fiber grille trim.
TWEETER MOUNTING CONSIDERATIONS
Use the waveguides, if possible.
The waveguide requires a hole 4" in diameter for mounting.
Aim the tweeters at a point in between the two front-seat positions,
if the waveguides will be mounted in the A-pillars or kick panels.
ADJUSTING THE CROSSOVER
If you are bi-amping the speakers, remove the jumpers, as illustrated in Figure 20.
If you are using the waveguides, move the switch to the “Waveguide” position.
If you are not using the waveguide, move the switch to the “No Waveguide” position.
After installing the system, set the “Tweeter Level” switch according to your
preference.
See pages 14–19 for dimensions, mounting and wiring diagrams, Thiele/Small
parameters and performance graphs.
ENGLISH
Model 560GT
i 660GTi
Description 5" 2-Way 6" 2-Way
professional-grade
professional-grade
automotive component
automotive component
speaker system speaker system
Power Handling (W peak) 500 600
Power Handling (W RMS) 125 150
Sensitivity (dB @ 2.83V)
91
92
Frequency Response (Hz) 58–30k 50–30k
Crossover Frequency (Hz)
2500
2500
V
oice Coil Diameter (mm)
50
50
Voice Coil Diameter (in) 2 2
Impedance 4 ohms 4 ohms
SPECIFICATIONS
Remove
Top Cover
Remover Four Top Cover Screws
Remove Jumpers
Page view 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 19 20

Comments to this Manuals

No comments