JBL Control 2.4GAW Owner's Manual

EnglishCONTROL®2.4GJBL®ON AIROWNER’S GUIDE®34199_Control_2_4G_Eng 02/08/07 14:07 Side 1

10Wall-Mounting the Speakers Using Third-Party Wall BracketsEach JBL On Air Control 2.4G wireless speaker contains a 1/4"-20 threaded insert on t

11EnglishFrequency Range (±3dB): 80Hz – 20kHzAmplifier Output: 15 Watts per channelLow-Frequency Driver: 100mm (4") Magnetically shieldedHigh-Fre

JBL and Control Series are trademarks of Harman International Industries, Incorporated, registered in the United States and/or other countries. Pro So

2This equipment has been tested and found to comply with the limitsfor a Class B digital device, pursuant to Part 15 of the FCC Rules.These limits are

3EnglishREAD FIRST! Important Safety Precautions!1. Read these instructions.2. Keep these instructions.3. Heed all warnings.4. Follow all instructions

4For more than 60 years, JBL has been involved in every aspect ofmusic and film recording and reproduction, from live performances to the recordings y

5EnglishNotes: For the sake of simplicity, throughout this manual we haveused the term “source” when describing connections and operation.This would a

6Step 3. Connect the speaker wire (included) to the push terminals onthe active speaker 5and the push terminals on the rear of thepassive speaker 9. S

7EnglishWhen connected properly, the top LED on the front of the activespeaker should be green. When first plugged in, it will sometimestake several s

8Adjusting the VolumeApplication 1Adding surround speakers to a home theater system: In this application, the output level of your Control 2.4G active

9EnglishAdjustable wall brackets are included for the two speakers andtransmitter module. The included bracket are for wall-mounting only. It is not t