JBL CS6100 User Manual download pdf (Page 10)

† The Peak Dynamic Power is measured by recording the highest center-to-peak voltage

measured across the output of a resistive load equal to minimum impedance of the

transducer, using a 50Hz sine wave burst, 3 cycles on, 17 cycles off.

CS6100

ATELLITES

Frequency Response (–6dB): 100Hz – 20kHz

Recommended Amplifier Power Range: 10 – 100 Watts

Sensitivity (2.83V @ 1 meter): 88dB

Nominal Impedance: 8 Ohms

Crossover Frequency: 3.0kHz; 12dB/octave

High-Frequency Driver: 1/2" (13mm) Titanium-laminate dome, magnetically shielded

idrange Driver:

ual 3-1/2" (89mm), magnetically shielded

Dimensions (H x W x D): 11-3/8" x 5-1/8" x 3-3/8" (289mm x 131mm x 86mm)

Weight: 3.2 lb (1.5kg)

CENTER

Frequency Response (–6dB): 100Hz – 20kHz

Recommended Amplifier Power Range: 10 – 100 Watts

Sensitivity (2.83V @ 1 meter): 88dB

Nominal Impedance: 8 Ohms

Crossover Frequency: 3.0kHz; 12dB/octave

High-Frequency Driver: 1/2" (13mm) Titanium-laminate dome, magnetically shielded

Midrange Driver: Dual 3-1/2" (89mm), magnetically shielded

Dimensions (H x W x D): 5-1/4" x 11-3/8" x 3-3/8" (133mm x 289mm x 86mm)

Weight: 3.2 lb (1.5kg)

SUBWOOFER

Frequency Response (–6dB): 30Hz – 120Hz

Amplifier: 150W RMS/300W Peak

†

Driver: 10" (250mm)

Dimensions (H x W x D, including feet): 18-1/2" x 12-3/4" x 15" (470mm x 324mm x 381mm)

Weight: 41 lb (18.6kg)

SPECIFICATIONS

CS6100-120V om.qxd 12/15/06 4:26 PM Page 12

1 2 ... 5 6 7 8 9 10 11 12

No comments

JBL CS6100 User Manual Page 10