Jbl SG2020 User Manual download pdf (Page 11)

10

Connections (cont.)

Headphones

Connecting a headphone automatically dis-

ables the loudspeakers in order to provide a pri-

vate listening session.

Antenna

Important

FM Antenna Connection

Unless radio signals are very weak, no external

antenna is necessary. Simply connect the sup-

plied FM indoor antenna wire to the terminal

marked FM on the back of the unit .

AM Antenna Connection

Connect the supplied AM loop antenna to the

terminal marked AM on the back of the unit .

Position

it for the

best

reception

FM indoor

antenna

75 ohms coaxial cable

FM external

antenna

(not supplied)

AM

AM loop antenna

(included)

FM

GND

44

44

32

GETTING STARTED

Setting the clock will be demonstrated with the

example of 9:25 AM.

Although JBL Soundgear will retain the clock

setting when you power it down into the

Standby mode, the setting will be lost if the

unit is unplugged or the electrical power is

interrupted for more than 10 seconds. In that

event, the clock setting will be erased, and JBL

Soundgear will display a blinking “— : —“.

When setting the time, remember that midnight

is at 12:00 AM and noon is at 12:00 PM.

1. Press the Clock button ™. (If the clock was

previously set, press and hold the Clock button

for more than 1.5 seconds.)

“12:00 AM” will blink in the Display c, to

indicate civilian 12-hour time. Press the Preset

Up c or Preset Down g button to display a

blinking “0:00”, which denotes 24-hour military

time.

2. Choose between the 24-hour display or 12-

hour display by pressing the Preset Up c or

the Preset Down g buttons.

3. Press the Set/Station button ∞ to store this

setting and proceed to the next step.

4. Set the hour by pressing the Preset Up c

or the Preset Down g buttons.

5. Press the Set/Station button ∞.

6. Set the minute by pressing the Preset Up

c or the Preset Down g buttons.

7. Press the Set/Station button ∞, and the

clock will resume normal operation.

Setting the Clock

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 19 20

Comments to this Manuals

No comments