Jbl AC2212/00 User Manual download pdf (Page 6)

AC2215/00

Compact 2-Way Loudspeaker

with 1 x 15" LF

Key Features:



100° x 100° Coverage.



PT™ Progressive Transition™

Waveguide for good pattern control

with low distortion.



Bi-Amp/Passive Switchable.



Optional U-Bracket for easy installation

(see AE Series Bracket Guide).

Applications:



Small performing arts facilities



Houses of worship



Theatrical sound design



Auditoriums



Sports facilities



Themed entertainment venues

AC2215/00 is a compact 2-way full-

range loudspeaker system comprised of

one 380 mm (15 in) low frequency

driver and one 38 mm (1.5 in) exit/

44 mm (1.75 in) voice-coil compression

driver. The PT Progressive Transition

waveguide provides wide 100° by 100°

coverage. High-slope passive crossovers

minimize band overlap.

The cabinet is ﬁtted with M10

threaded suspension points. Optional

U-bracket is available for easy

installation.

AC2215/00 is part of JBL’s AE

Application Engineered Series, a

versatile family of loudspeakers for a

wide variety of ﬁxed installation

applications.

Speciﬁcations:

System:

Frequency Range

(-10 dB): 42 Hz – 19 kHz

Frequency Response

(±3 dB): 50 Hz – 17 kHz

Coverage Pattern: 100° x 100°

Directivity Factor (Q): 7.1

Directivity Index (DI): 8.5 dB

Crossover Modes: Bi-amp/Passive switchable

Passive Crossover Slopes

:4th order (24 dB/oct) Butterworth HP & LP, 1300 Hz

Transducer Power Rating (AES)

: LF: 275 W (1100 W peak), 2 hrs

250 W (1000 W peak), 100 hrs

HF: 50 W (200 W peak), 2 hrs

Long-Term System Power Rating (IEC)

: Passive mode: 250 W (1000 W peak), 100 hrs

Maximum SPL

: Bi-amp mode:

LF: 121 dB-SPL cont avg (127 dB peak)

HF: 126 dB-SPL cont avg (132 dB peak)

Passive mode:

121 dB-SPL cont avg (127 dB peak)

System Sensitivity

(1W @ 1m): Passive mode: 97 dB SPL

Transducers:

Low Frequency Driver:

1 x JBL M115-8A 380 mm (15 in) driver with 63 mm (2.5 in) voice coil

Nominal Impedance: 8 ohms

Sensitivity

(1W @ 1m, within operational band): 97 dB SPL

High Frequency Driver: JBL 2418H-1/MTA, 44 mm (1.75 in) voice coil

Nominal Impedance: 8 ohms

Sensitivity (1W @ 1m): 109 dB SPL

Waveguide: PT-F1010HF

Physical:

Enclosure: Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior

grade 11-ply Finnish birch plywood

Suspension Attachment: 15 points (4 top, 4 bottom, 2 each side, 3 rear), M10 threaded

hardware

Finish: Black DuraFlex™ ﬁnish. White available upon request.

Grille: Powder coated 14 gauge perforated steel, with acoustically trans-

parent black foam backing.

Input Connector: NL4 Neutrik Speakon

and CE-compliant covered barrier strip

terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG)

wire or max width 9 mm (.375 in) spade lugs. Speakon in paral-

lel with barrier strip for loop-through.

Environmental Speciﬁcations: Mil-Std 810; IP-x3 per IEC529.

Dimensions (H x W x D): 637 x 422 x 504 mm

(25.1 x 16.6 x 19.9 in)

Net Weight: 25.0 kg (55 lb)

Optional Accessories: M10 x 35 mm forged shoulder eyebolts with washers

U-Bracket MTU-2

Bi-amp mode, with recommended active tuning.

Resultant engineered acoustical response of crossover network and components.

AES standard, one decade pink noise with 6 dB crest factor within device's operational band, free air. Standard AES 2 hr rating

plus long-term 100 hr rating are speciﬁed for low-frequency transducers.

IEC standard, full bandwidth pink noise with 6 dB crest factor, 100 hours.

Calculated based on power rating and sensitivity, exclusive of power compression.

Anechoic sensitivity in free ﬁeld, no additional sensitivity gain from boundary loading.

JBL continually engages in research related to product improvement. Changes introduced into existing products without notice

are an expression of that philosophy.

1 2 3 4 5 6 7 8 9 10 11 ... 23 24

Comments to this Manuals

No comments

Jbl AC2212/00 User Manual Page 6

Comments to this Manuals

Related products and manuals for Acoustics Jbl AC2212/00